Title : ASHING FURNACES
Content : Carbolite Gero's ashing furnace range covers one of the most common applications for laboratory chamber furnaces: To heat combustible samples in order to analyse the resulting ash residue. As there is no single solution for all requirements, different furnaces tailored to ashing and burn-off applications are available.
Title : ASHING FURNACE AAF - 3 & 7 LITRES
Content : The AAF ashing furnace range is designed specifically to provide optimum ashing conditions to ensure complete combustion of the sample. STANDARD FEATURES 1100 °C maximum operating temperatures Carbolite Gero 301 controller, with single ramp to set-point & process timer Large floor area allows for large numbers of samples Ideal for ashing foods, plastics, coal & other hydrocarbon materials Designed to comply with ISO 1171:2010, ASTM D3174-04:2010 and ASTM D4422 Wire elements are protected from chemical & mechanical damage by a hard wearing alumina based liner 4 sided heating (2 sides, roof & hearth) Air inlet & tall chimney give airflow of 4 to 5 changes per minute Low chamber height holds airflow close to samples for optimum combustion Powerful elements with graded winding compensate for heat loss due to high airflow Preheating of air before it enters the chamber gives excellent uniformity Sample tray and loading handle
Title : ASHING FURNACE AAF - 18 & 32 LITRES
Content : The AAF ashing furnace range is designed specifically to provide optimum ashing conditions to ensure complete combustion of the sample. STANDARD FEATURES 1100 °C & 1200 °C maximum operating temperatures Carbolite Gero 301 controller, with single ramp to set-point & process timer Two tier rack system doubling the sample capacity With sample trays and loading handle allows for large number of samples Ideal for ashing foods, plastics, coal & other hydrocarbon materials Preheating of air before it enters the chamber Protection of the elements from carbon build-up or corrosive atmosphere, using silicon carbide tiles 2 sided heating
Title : ASHING FURNACE AAF-BAL
Content : The AAF-BAL thermogravimetric analysis (TGA) furnace incorporates an integral balance. It can be used for loss on ignition applications where weight change of the sample must be monitored during the heating process. STANDARD FEATURES 3216cc controller with single ramp to setpoint and process timer Protection of the elements from carbon build-up or corrosive atmosphere, using silicon carbide tiles 2 sided heating Balance runs independently of the furnace control system Maximum capacity of balance is 3 kg with a resolution of 0.01 (other capacities available)
Title : ASHING FURNACE GSM
Content : Some analysis techniques may be affected by alumina or silica dust (Al2O3 at SiO2) - the materials normally used to construct furnace chambers. To avoid this the GSM furnace chamber is constructed from a fused quartz material. Some analysis techniques may be affected by alumina or silica dust (Al2O3 at SiO2) - the materials normally used to construct furnace chambers. To avoid this the GSM furnace chamber is constructed from a fused quartz material.
Title : AFTERBURNER ASHING FURNACE ABF
Content : The ABF Afterburner Ashing Furnace is particularly suitable for ashing larger samples or materials such as biomass, which are likely to generate substantial amounts of smoke. STANDARD FEATURES 800°C maximum operating temperature - ashing chamber 28 Litre chamber volume Afterburner rated for up to 40 g carbon per ashing load Two tier baskets with loading tray and handle Programmable EPC3016P1 controller Independent control of afterburner temperature up to 950°C Silicon carbide shielded wire wound elements Supplied with 3-phase supply as standard Ethernet communications
